PL type single machine bag filter

The PL type single machine bag filter is a small dust removal equipment mainly used for dust collection at the lifting points of the top, bottom, top, and conveying equipment of the warehouse. The PL type single machine bag dust collector belongs to the mechanical shaking dust collector and is a new product successfully developed through improvement based on imported dust removal equipment. The basic structure of a PL single machine dust collector consists of three components: a fan, a filter, and a dust collector. Each component is installed in a vertical frame, a steel plate shell, and rust proof baking paint. The appearance is elegant, the structure is reliable, and it is easy to use. The PL type single machine dust collector is a type of dust containing gas that enters the ash hopper through the air inlet or enters the dust removal filter bag room through an open flange. The dust containing gas is filtered through the filter bag to form clean gas and enters the clean gas room, which is then discharged by a fan through the clean gas exhaust port. Dust removal is achieved by the program controller timing and sequentially activating the arterial flushing valve, causing compressed air inside the bag to be sprayed out through the injection hole and induced to enter the filter bag through the Venturi tube, causing the filter bag to rapidly expand in an instant and shake off the dust with the reverse effect of the airflow, achieving the purpose of dust removal.

The PL single machine bag filter is a fresh product developed based on the absorption of imported dust removal equipment. It is a small volume, on-site dust removal unit. The main technical indicators of the PL type single machine dust collector have reached the domestic level, and its sales are widespread and well received by users. PL type single machine bag filter is economical and practical; The structure is simple and compact, easy to install, and easy to maintain. It is mainly used for dust collection at discharge and lifting points such as the top, bottom, top, and various conveyors of the warehouse. The machine uses polyester dust removal bags, and the dust removal effect reaches 90% when the inlet temperature is less than 120 ℃. If applicable, a single bag dust collector with temperature resistance and filter material can be provided.

Application of PL type single machine bag filter:

The PL type single machine bag dust collector is widely used in the casting industry, ceramic industry, glass industry, as well as refractory materials, cement building materials, grinding wheel manufacturing, chemical products, machine processing and other industries for dust removal. This product is suitable for heavy metal chips, casting sand, such as lathes, grinders, milling machines, grinding wheels, polishing machines, etc., as well as medium density dust, such as cement, ceramic powder, gypsum powder, asbestos powder, carbon powder, pigments, bakelite powder, plastic powder, etc. It can be widely used for dust removal in industries such as casting, ceramics, glass, refractory materials, cement building materials, grinding wheel manufacturing, chemical products, and mechanical processing.

The basic structure of the PL single machine bag filter unit consists of three components: a fan, a filter, and a dust collector. Each component is installed in a vertical frame, a steel plate shell, and rust proof baking paint. It has a beautiful appearance, structure, easy operation, and convenient use.

The characteristics of PL type single machine bag filter:

1. Small size, flexible movement, convenient installation and maintenance;

2. Using a flat cloth bag filter, the dust removal and cleaning effect is good;

3. Internally equipped with centrifugal fans, with good performance and low noise;

4. Equipped with maintenance doors, convenient for maintenance and bag replacement.

Structural characteristics of various components of PL type single machine bag filter:

1. The fan components adopt a simulated centrifugal fan, which has a large air volume, high air pressure, a hard fan characteristic curve, and adopts noise reduction measures, resulting in low noise during use.

2. The filter components use 208 industrial polyester twill velvet fabric as the filter material for flat cloth bag filters. Each bag is equipped with spring steel wire mesh, which has good filtering effect, convenient replacement of filter bags, and long service life.

3. The dust cleaning mechanism of the filter component is driven by an electric motor to drive the eccentric wheel, and the connecting rod causes the cloth bag to shake and the dust adhering to the outer surface of the filter bag. Its control devices are divided into two types: automatic control and manual control. Self control means that during continuous operation of the fan, the cleaning mechanism will automatically vibrate and clean the dust at a fixed time. Manual control means that the cleaning mechanism will automatically work after the fan stops, and will stop after a few seconds. The cleaning motor can also be started to vibrate and clean the dust at any time as needed, and the cleaning time can be adjusted by the user through the time relay.

4. The filter components are equipped with a flexible and sealed folding access door for maintenance and removal of the filter when needed.

5. The dust collector components adopt a suction bucket structure, making dust convenient.

6. The air inlet port on the side above the dust collector can be folded down when needed to increase the area of the air inlet.

7. The PL single machine bag filter unit has sixteen specifications, divided into two types: A and B. A type has ash hopper drawers, while B type does not have ash hopper drawers. Lower part with flange; Directly connected by the user to the feeding port of the folding bag bin, the mixing warehouse, sandblasting box, and the belt transportation turning point, on-site dust removal equipment is carried out, and the dust is directly recovered.

8. The PL type single machine bag filter unit can be manufactured specifically according to the actual needs of the design unit or users.