Mine vibrating screen dust collector

The mine vibrating screen dust collector, also known as the gravel screening dust collector, is a dust purification equipment mainly used for vibrating screen operations, to deal with the pollution problems caused by vibrating screens during the vibration process. At present, the vibrating screen dust collector has been widely used in various industries such as mining, building materials, grain, chemical, casting, ceramics, etc. It is a relatively popular bag dust collector or material collection equipment.

Working principle of mine vibrating screen dust collector:

During the operation of the vibrating screen, a large amount of dust is generated. When the vibrating screen dust collector starts working, the centrifugal fan of the dust collector forms a negative pressure zone at the overflow of the dust, and the dusty gas is sucked into the dust collector. There are multiple filter bags inside the dust collector. When the dusty gas passes through the filter bags, the dust is blocked and separated, and the purified gas is discharged through the fan. When the dust on the surface of the filter bag increases and the resistance value reaches the predetermined value, the pressure sensor sends an indication signal to the electric control box. The pulse spraying system controlled by pLc automatically sprays the filter bag, shaking off the dust attached to the filter bag and directly reaching the belt through a sealed ash discharge pipe. Always maintain good filtration performance of the filter bag without generating secondary dust. Based on the work of the vibrating screen and the actual situation on site, design and install the dust removal device, fully considering issues such as vibrating screen maintenance and screen replacement.

Main characteristics of mine vibrating screen dust collector:

1. The one-time investment is small, and compared to other dust collectors, it can recover the investment cost after running for 2 months.

2. Suitable for dust removal in vibrating screen systems for coal, sintered ore, ore and other raw materials.

3. The pulse jet cleaning of the dust collector is automatically controlled by PLC, ensuring stability.

4. The dust recovered by the dust collector directly returns to the silo or belt, without secondary pollution, saving manpower and material resources, and effectively recovering raw materials.

5. Low power consumption, low operating and management costs.

6. Select filter media of different materials according to their properties and temperature, to improve dust removal efficiency and service life.

7. The dust collector does not occupy any land.

8. Purify, meet environmental standards, and solve the problem of dust pollution in vibrating screens.